Bracton SoSafe Grafitti Remover 1L Red

EACH

Code: SORD003SAT

Brand: SOSAFE

PRODUCT DESCRIPTION

SoSafe Graffiti Remover Red Label 1 Litre is a heavy-duty graffiti remover designed for the most stubborn and baked-on graffiti on hard, porous surfaces.
Engineered for maximum strength, this ready-to-use formula penetrates deep into masonry, concrete, brick, stone, and other tough substrates to lift difficult spray paints, inks, and dyes.
Supplied in a convenient 1 litre pack for direct use without dilution.

KEY BENEFITS

Ultra-strong remover for the most stubborn graffiti, including older, cured, or multiple layers of paint.
Designed for porous and unpainted surfaces such as concrete, stone, and brick.
Non-flammable formulation for safer handling compared to traditional solvent removers.
Ready-to-use for immediate application—no mixing required.

INGREDIENTS / COMPOSITION

Contains advanced solvent blends and penetrants formulated to attack stubborn graffiti on porous substrates.
Non-flammable formulation enhances safety during storage and use.

INSTRUCTIONS FOR USE

Apply directly to the graffiti using a brush, roller, or low-pressure sprayer.
Allow 10–20 minutes dwell time for penetration into porous surfaces.
Agitate with a stiff bristle brush to break down stubborn graffiti layers.
Rinse thoroughly with high-pressure water to flush out residue and lifted paint.
Repeat application for very old, multi-layered, or heat-cured graffiti.
Important: For porous, unpainted surfaces only. Do not use on painted or coated surfaces as this product will remove the underlying coating. For painted walls, use SoSafe Yellow Label. For general porous graffiti removal, Blue Label may suffice.

SAFETY DIRECTIONS

Use outdoors or in well-ventilated areas. Avoid inhaling vapours.
Wear gloves, protective clothing, and eye protection during application.
Avoid skin and eye contact. In case of contact, rinse with water immediately.
Keep out of reach of children. Do not ingest. Dispose of container according to local regulations.